
Reliable performance of a subsurface safety valve is critical for maintaining well control and preventing catastrophic failures. This guide outlines the standardized procedure for field testing these valves to ensure they perform according to site-specific operational requirements.
Step 1: Isolate the wellbore
Shut in the well completely by closing the master valves to ensure no dynamic flow impacts the testing sequence. Verify that all surface pressure gauges confirm a static, zero-flow state before beginning any mechanical manipulation.
Step 2: Verify surface control pressure
Monitor the hydraulic control line pressure to ensure it is bled down to the designated test threshold. If the gauge shows residual pressure, the valve may fail to seat correctly, leading to false failure reports.
Step 3: Execute subsurface safety valve closure
Initiate the bleed-down process for the hydraulic control fluid to trigger the closure mechanism within the valve assembly. Listen for the distinct sound of the flapper or ball seating, indicating that the primary seal is engaged.
Step 4: Apply differential pressure for testing
Slowly introduce pressure from the wellbore side to test the seat integrity against the closure element. Monitor the pressure gauge carefully for any bleed-off that would indicate a leaking seat or poor seal quality.
Step 5: Monitor for seat leakage
Hold the differential pressure for the required duration while observing for any drop in the gauge reading. A rapid decline signifies an insufficient seal, necessitating a full inspection of the sealing surface and potential debris removal.
Step 6: Perform control line integrity check
After the valve test, repressurize the hydraulic control line to check for external leaks or internal tubing integrity issues. Any fluctuations during this phase suggest a compromise in the control line that could prevent future valve operation.
Step 7: Confirm full valve reopening
Slowly restore full operating hydraulic pressure to return the valve to its open, production-ready state. Verify the transition by observing a clear return to normal tubing pressure and confirming the valve actuation is unobstructed.
Proper documentation of your testing results is essential for regulatory compliance and long-term well monitoring. Before returning the equipment to service, always perform a final visual inspection of all hydraulic connections to ensure they are secure and leak-free.
Need help finding vendors for your project?
Explore Trunkline’s Top 10 vendor rankings to find companies with the experience and capabilities to get the job done.

